Solar Power Splitter - Injector: Allows delivery of 0-60 volts of DC power to two different outdoor PoE-equipped devices. Can be used as an injector to simultaneously power multiple PoE devices with different voltage requirements, Can be used as a splitter to separate power from the PoE data interface to run a non-PoE device, such as an analog camera.

Overview Our Dual PoE Splitter/Injector (PSI) allows you to deliver 0-60 volts of DC power to two different outdoor PoE-equipped devices, especially when the devices require different voltages, such as a 48v radio and a 24v camera. Can also be used to separate power from the PoE input for devices that aren't PoE-ready. Flexible to fit your specific requirements. Use as an Injector to simultaneously power multiple PoE devices with different voltage requirements, for example, a 48v radio and a 24v camera. Use as a Splitter to separate power from the PoE data interface to run a non-PoE device, such as an analog camera. Cost-, time- and space-reducing alternative. This PSI saves you time and money by eliminating the need to purchase and install a separate PoE Splitter/Injector for each electronic device in your application. The small form factor reduces the impact to valuable enclosure space and the DIN rail housing greatly reduces installation complexity. Low maintenance. This passive device can be mounted at the top of a pole and does not require maintenance. Universal. The design is compatible with any equipment supporting the IEEE standard pinout for PoE devices (Vin +: Pins 4 and 5, Vin -: Pins 7 and 8) and supports up to 60 volts per PoE-enabled device. Rugged and reliable enclosure. NEMA 4X, UV-protected fiberglass enclosure Designed for pole-top mounting. State of the art components for the harshest of environments. Ideal for outdoor use in areas with extreme temperature variations (-4 - 158�F, -20 - 70�C).